NO.1 You configured a GRE tunnel that traverses a path using default MTU settings.
You want to ensure that packets are not dropped or fragmented.
In this scenario, what is the maximum packet size that would traverse the GRE tunnel?
A. 1524
B. 1476
C. 1500
D. 1400
Answer: B

Explanation: The default Ethernet MTU is 1500. There is a 24 byte GRE overhead, so there remain
bytes for the data packet.
References: https://kb.juniper.net/InfoCenter/index?page=content&id=KB7848&actp=search

NO.2 What is reviewed first in the BGP route selection process?
A. the next-hop resolution
B. the route with an origin of incomplete
C. the path with no MED value
D. the peer with the lowest IP address
Answer: A

JN0-346模擬問題集   JN0-346時間   
Explanation: Understanding BGP Path Selection The algorithm for determining the active route is as
follows: Etc.

NO.3 Which two statements are correct regarding the root bridge election process when using STP?
(Choose two.)
A. A lower bridge priority is preferred.
B. A higher bridge priority is preferred.
C. A lower system MAC address is preferred.
D. A higher system MAC address is preferred.
Answer: A,C

JN0-346日本語   JN0-346テスト参考書   
Explanation: The root bridge for each spanning-tree protocol (STP) instance is determined by the
ID. The bridge ID consists of a configurable bridge priority and the MAC address of the bridge. The
with the lowest bridge ID is elected as the root bridge. If the bridge priorities are equal or if the
priority is not configured, the bridge with the lowest MAC address is elected the root bridge.

NO.4 Click the Exhibit button. Referring to the exhibit, which type of route is displayed?
A. martian
B. static
C. generate
D. aggregate
Answer: D

Explanation: From the exhibit we see: *[Aggegate/130]



試験科目:Enterprise Routing and Switching, Specialist (JNCIS-ENT)
問題と解答:全65問 JN0-346 試験番号

>> JN0-346 試験番号


JPexamは最新の7893X問題集と高品質の1z0-808問題と回答を提供します。JPexamの70-533 VCEテストエンジンと300-208試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の1z1-436 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。



P2020-795試験感想、IBM Decision Optimization Technical Mastery Test v2




試験科目:IBM Decision Optimization Technical Mastery Test v2
問題と解答:全45問 P2020-795 日本語サンプル

>> P2020-795 日本語サンプル


もし君はIBMP2020-795試験感想に合格するのを通じて、競争が激しいIT業種での地位を高めて、IT技能を増強するなら、JPexamの IBMP2020-795試験感想を選んだほうがいいです。長年の努力を通じて、JPexamのIBMのP2020-795試験感想の合格率が100パーセントになっていました。JPexamを選ぶのは成功を選ぶのに等しいです。

NO.1 The roles of sellers and technical sellers often overlap. What key action must the technical
seller take to enable the seller to provide an accurate software license price quote for IBM
Decision Optimization Center?
A. Review proposals for similar past solutions for existing clients
B. Determine if any contract terms should be altered
C. Discuss solution implementation timeline and project resources
D. Discuss deployment architecture and expected usage patterns
Answer: D

P2020-795復習対策   P2020-795資格準備   

NO.2 A technical seller conducts a discovery workshop with a client. What is important to know
when assessing the business use cases of the client?
A. Evaluate the complexity of the optimization model and estimate key performance indicators.
B. Evaluate the complexity of the optimization model and determine the client s total revenue
C. Compare the current to the desired situation and determine relevant key performance
D. Get a deep understanding of the desired situation and the client's total revenue.
Answer: C


NO.3 A customer wants to deploy an optimization based solution in a scalable and high availability
(HA) deployment environment that provides failover and load balancing capabilities. Which
application server can be used for deploying Decision Optimization Center server components to
provide an HA environment?
A. WebSphere Application Server Community Edition
B. WebSphere Application Server
C. WebSphere Application Server Network Deployment
D. Oracle WebLogic Server
Answer: B

P2020-795合格   P2020-795ファンデーション   

NO.4 A technical seller can identify an IBM Decision Optimization Center (DOC) opportunity versus
an IBM CPLEX opportunity when the customer's:
A. Business users want the ability to run what-if analysis and scenario comparisons.
B. OR team has an existing OPL model and would like to solve it on a single desktop
C. IT team is interested in embedding the engine into a proprietary application.
D. OR team wishes to link the engine to IBM SPSS Modeler.
Answer: A


JPexamは最新の070-473問題集と高品質のC-THR88-1608問題と回答を提供します。JPexamのC9550-512 VCEテストエンジンと156-215.77試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のAWS-Solutions-Associate PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。







試験科目:VMware Certified Associate 6 - Data Center Virtualization Fundamentals Exam
問題と解答:全52問 1V0-621 資格

>> 1V0-621 資格


NO.1 Which two represent challenges that could be met by Data Center Virtualization? (Choose two.)
A. An organization's server team requires 1-2 hours of downtime for applications when performing
planned hardware maintenance.
B. An organization's server team requires 5 business days to provision a new server
C. An organization is reporting that servers become unavailable for a short time during unplanned
D. An organization is reporting that it takes 24 hours to provision new desktops.
Answer: B,C

1V0-621最新な   1V0-621モード   

NO.2 Refer to the Exhibit. An operator notices that the state of a Virtual Machine (VM) indicates that
it is Invalid
What condition could result in this state?
A. The VM was imported from an older version of vSphere and is not compatible with vSphere 6.x.
B. The VM has been enabled for Fault Tolerance but one of the nodes is not functioning
C. The VM has no virtual disk file.
D. The VM no longer exists.
Answer: C


NO.3 Which vSphere feature automatically optimized resource utilization and responds to workload
A. Dynamic Resource Scheduler
B. Storage DRS
C. Storage 1/0 Control
D. Data Protection
Answer: B

NO.4 Which two vSphere 6.x technologies simplify management in data centers with multiple
vCenter instances?
(Choose two)
A. Long Distance vMotion
B. vSphere Distributed Switch
C. Content Library
D. Distributed Resource Scheduler
Answer: A,D


JPshikenは最新のHH0-500問題集と高品質のC-THR82-1605問題と回答を提供します。JPshikenのHPE2-E67 VCEテストエンジンと70-762試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のC-TPLM22-64 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。



HPE2-E67合格記、HPE IT Business Conversations


NO.1 Which HPE software-defined solution was created for automating infrastructure management?
A. OneView
B. Agile Manager
C. VM Explorer
D. Adoption Readiness Tool
Answer: D

HPE2-E67資格問題集   HPE2-E67復習問題集   

NO.2 You are visiting a customer who is looking into emerging technologies and alternative
application delivery
models. During the meeting, the CIO asks you what makes a hybrid infrastructure different from
IT infrastructure. How should you respond?
A. It consists of traditional IT and various cloud services.
B. It consists of traditional IT services as well as shadow IT services.
C. It consists of various cloud solutions without using any traditional II services.
D. It consists of third-party service providers to deliver all IT services.
Answer: C


NO.3 A customer is focused on reducing operating costs. What benefit of adopting an HPE hybrid
should you emphasize?
A. the shift to a CAPEX-based funding model with HPE Flexible Capacity
B. the automation of many maintenance and provisioning tasks
C. the nature of public cloud as a CAPEX-based resource
D. the ability to leverage existing infrastructure
Answer: D


NO.4 When talking with customers, what is the most important byproduct of discovery questions?
A. uncovering who the competition is.
B. uncovering industry trends.
C. uncovering the customer's organizational structure and decision makers.
D. uncovering the customer's issues and desired business outcomes.
Answer: D




試験科目:HPE IT Business Conversations
問題と解答:全50問 HPE2-E67 科目対策

>> HPE2-E67 科目対策


JPshikenは最新のC-THR88-1605問題集と高品質の070-697問題と回答を提供します。JPshikenのC_THR91_1608 VCEテストエンジンとC9050-042試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のE_HANABW151 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。





NO.1 Which of the following statements are true about Data Migration Templates?
There are 2 correct answers to this question.
A. Each template provides field definitions, which are used during the population of the templates
B. The template structure is predefined, but can be changed.
C. Each template contains tabs that channels the data into coherent units
D. Each template contains different tabs that group the data into logical units
Answer: A,D


NO.2 Which of the following statement(s) is/are true?
There are 2 correct answers to this question.
A. Data from reports inserted in Microsoft Excel can be referenced, mapped, and saved as part of a
B. Data from reports inserted in Microsoft Excel cannot be referenced, and recordeD.
C. By simply using the log on option on the SAP Cloud for Customer ribbon tab, data can be refreshed
include any subsequent activity recorded in your SAP Cloud for Customer system
D. Investigation and configuring of smart devices
Answer: C

NO.3 How do you provide user access to reports?
There are 2 correct answers to this question.
A. Assign reports to business users.
B. Assign reports to work center views.
C. Assign reports to employees.
D. Assign reports to dashboards.
Answer: B,D


NO.4 Copy of Source System is recommended for which of the following use?
Please choose the correct answer.
A. Both a and b
B. For data migration testing when initial test tenant cannot be used
C. For requesting production tenants
D. None of the above
Answer: B

C_C4C10_2015テストトレーニング   C_C4C10_2015信頼度   

SAPのC_C4C10_2015試験解説に受かるために一所懸命頑張って勉強していれば、あなたは間違っているのです。もちろん頑張って勉強するのは試験に合格することができますが、望ましい効果を達成できないかもしれません。現在はインターネットの時代で、試験に合格する ショートカットがたくさんあります。JPexamのSAPのC_C4C10_2015試験解説はとても良いトレーニング資料で、あなたが試験に合格することを保証します。この資料は値段が手頃だけでなく、あなたの時間を大量に節約できます。そうしたら、半分の労力で二倍の効果を得ることができます。

試験科目:SAP Certified Application Consultant - SAP Cloud for Customer
問題と解答:全120問 C_C4C10_2015試験解説

>> C_C4C10_2015試験解説

試験科目:SAP Certified Application Associate - Management Accounting (CO) with SAP ERP 6.0 EHP6
問題と解答:全175問 C_TFIN22_66受験料過去問

>> C_TFIN22_66受験料過去問









NO.1 Which encapsulation supports an interface that is configured for an EVN trunk?
B. Frame Relay
C. 802.1Q
Answer: C


You are a network engineer with ROUTE.com, a small IT company. They have recently merged two
organizations and
now need to merge their networks as shown in the topology exhibit. One network is using OSPF as its
IGP and the
other is using EIGRP as its IGP. R4 has been added to the existing OSPF network to provide the
interconnect between
the OSPF and EIGRP networks. Two links have been added that will provide redundancy.
The network requirements state that you must be able to ping and telnet from loopback 101 on R1 to
the OPSF
domain test address of All traffic must use the shortest path that provides the greatest
bandwidth. The
redundant paths from the OSPF network to the EIGRP network must be available in case of a link
failure. No static or
default routing is allowed in either network.
A previous network engineer has started the merger implementation and has successfully assigned
and verified all IP
addressing and basic IGP routing. You have been tasked with completing the implementation and
ensuring that the
network requirements are met. You may not remove or change any of the configuration commands
currently on any
of the routers. You may add new commands or change default values.
First we need to fnd out 5 parameters
(Bandwidth, Delay, Reliability, Load, MTU) of the s0/0/ interface (the interface of R2 connected to R4)
for redistribution:
R2#show interface s0/0/0
Write down these 5 parameters, notice that we have to divide the Delay by 10 because the metric
unit is in tens of
microsecond. For example, we get Bandwidth=1544 Kbit, Delay=20000 us, Reliability=255, Load=1,
MTU=1500 bytes
then we would redistribute as follows:
R2#config terminal
R2(config)# router ospf 1
R2(config-router)# redistribute eigrp 100 metric-type 1 subnets
R2(config-router)#router eigrp 100
R2(config-router)#redistribute ospf 1 metric 1544 2000 255 1 1500
Note: In fact, these parameters are just used for reference and we can use other parameters with no
If the delay is 20000us then we need to divide it by 10, that is 20000 / 10 = 2000)
For R3 we use the show interface fa0/0 to get 5 parameters too
R3#show interface fa0/0
For example we get Bandwidth=10000 Kbit, Delay=1000 us, Reliability=255, Load=1, MTU=1500 bytes
R3#config terminal
R3(config)#router ospf 1
R3(config-router)#redistribute eigrp 100 metric-type 1 subnets
R3(config-router)#router eigrp 100
R3(config-router)#redistribute ospf 1 metric 10000 100 255 1 1500
Finally you should try to "show ip route" to see the network (the network behind R4) in
the routing table
of R1 and make a ping from R1 to this network.
Note: If the link between R2 and R3 is FastEthernet link, we must put the command below under
EIGRP process to
make traffic from R1 to go through R3 (R1 -> R2 -> R3 -> R4), which is better than R1 -> R2 -> R4.
R2(config-router)# distance eigrp 90 105
This command sets the Administrative Distance of all EIGRP internal routes to 90 and all EIGRP
external routes to 105,
which is smaller than the Administrative Distance of OSPF (110) -> the link between R2 & R3 will be
preferred to the
serial link between R2 & R4.
Note: The actual OPSF and EIGRP process numbers may change in the actual exam so be sure to use
the actual correct
values, but the overall solution is the same.

NO.3 A network engineer has set up VRF-Lite on two routers where all the interfaces are in the
same VRF. At a later time, a
new loopback is added to Router 1, but it cannot ping any of the existing interfaces. Which two
configurations enable
the local or remote router to ping the loopback from any existing interface? (Choose two.)
A. adding dynamic routing between the two routers and advertising the loopback
B. adding the loopback to the VRF
C. adding a static route for the VRF that points to the loopback interface
D. adding all interfaces to the global and VRF routing tables
E. adding the IP address of the loopback to the export route targets for the VRF
F. adding a static route for the VRF that points to the global route table
Answer: B,F

300-101シュミレーション問題集   300-101復習問題集   

NO.4 Other than a working EIGRP configuration, which option must be the same on all routers for
EIGRP authentication key role over to work correctly?
C. Time
D. Passwords
Answer: D


最も短い時間で自分のIT技能を増強したいけれど、質の良い学習教材がないので悩んでいますか。ご心配なく、JPexamのCiscoの300-101必殺問題集を手に入れるなら、ITに関する認定試験はなんでも楽に合格できます。JPexamの Ciscoの300-101必殺問題集は高度に認証されたIT領域の専門家の経験と創造を含めているものです。JPexamは君にとって、ベストな選択だといっても良いです。

試験科目:CCIE Collaboration
問題と解答:全620問 400-051合格内容

>> 400-051合格内容

試験科目:Implementing Cisco IP Routing (ROUTE v2.0)
問題と解答:全185問 300-101必殺問題集

>> 300-101必殺問題集


IT認定試験の中でどんな試験を受けても、JPexamの400-051合格内容はあなたに大きなヘルプを与えることができます。それは JPexamの400-051合格内容には実際の試験に出題される可能性がある問題をすべて含んでいて、しかもあなたをよりよく問題を理解させるように詳しい解析を与えますから。真剣にJPexamのCisco 400-051合格内容を勉強する限り、受験したい試験に楽に合格することができるということです。




オラクル 1Z0-144日本語模擬体験に合格する秘訣がわかる?



偉大な事業を実現するために信心を持つ必要があります。あなたは自分の知識レベルを疑っていて試験の準備をする前に詰め込み勉強しているときに、自分がどうやって試験に受かることを確保するかを考えましたか。心配しないでください。JPexamはあなたがOracleの1Z0-144日本語模擬体験に合格する確保です。JPexam のトレーニング試験は問題と解答に含まれています。しかも100パーセントの合格率を保証できます。JPexamのOracleの1Z0-144日本語模擬体験を手に入れたら、あなたは自分の第一歩を進めることができます。試験に合格してから、あなたのキャリアは美しい時期を迎えるようになります。

試験科目:Oracle Database 11g: Program with PL/SQL (1Z0-144日本語版)
問題と解答:全103問 1Z0-144日本語 テスト難易度

>> 1Z0-144日本語 テスト難易度



NO.1 次の表を作成し 、次のコードを実行します:
A. エラーになります が、挿入された行と最初の行への更新を保存します。
B. 正常に実行し、すべての行が更新されます。
C. エラーになります が、挿入された行を保存します 。しかし、行は更新されません。
D. エラーになり、す べてのデータ操作言語(DML )文はロールバ ックされます。
Answer: B


NO.2 どの 2 つのステ ートメントは PL/SQL パ ッケージのコンポーネントについて正しいです
か。(2 つを選んでください。)
A. パッ ケ ー ジ化 さ れた パ ブ リッ ク 変数 が セッ シ ョ ンで 最 初に 呼 び出 さ れ ると き 、パ ッ ケー
B. パッケージ本体は パッケージ仕様なしで存在することができます。
C. パッケージ仕様は パッケージ本体なしで存在することができます。
D. パッケージには仕様部と本体の両方を持っていなければなりません。
Answer: A,C


NO.3 どの 2 つのタ スクがプロシージャと しての代わりに機能と して作成する必要があ り
ますか。(2 つを選んでください。)
A. 呼び出し元の環境 に複数の値を計算し、返すタス ク
B. コードの PL7SQL ブ ロックの参照ホストまたはバインド変数
C. Oracle サーバー内の複雑なデータ分析を処理することによってではなく、 アプリケーショ
ンにデータを取得して、データの独立性を増加させる SQL で実行されるタスク
D. 呼び出し環境に戻 す必要がある値を計算するタスク
Answer: B,D

1Z0-144日本語問題と解答   1Z0-144日本語合格率   

NO.4 どのステートメントは正しく関数お よ びプロシージャの機 能 について説明します か 。
( 該当するものをすべて選択してください。)
A. プロシージャは値のない return 文を含め ることができます。
B. プロシージャは SQL 式の一部として、または PL/SQL 文として実行することができます。
C. 関数は単一の return 節を使用して複数の値を返すことができます。
D. 関数は呼び出し元の環境から転送されたゼロ以上のパラメータを含めることができま
Answer: A
Reference: http://docs.oracle.com/cd/B19306_01 /appdev.102 /b14261 /subprograms.htm (using the
return statement)

JPexamは最新の1z1-436問題集と高品質の200-105問題と回答を提供します。JPexamのP6040-015 VCEテストエンジンとC-THR82-1608試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のC-THR81-1608 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。